Temperature parameters on injection molding machines. Including the Temperature Exercise selection, Barrel temperature, Oil temperature, Oil temperature preheat, etc.
| No. |
Temperature – Exercise selection 1 |
| 0 |
1 stage temperature exercise – Temperature is not use when the setting is 0 during the 1 stage warming buffering zon. |
| 1 |
2 stage temperature exercise – Temperature is not use when the setting is 0 during the 2 stage warming buffering zon. |
| 2 |
3 stage temperature exercise – Temperature is not use when the setting is 0 during the 3 stage warming buffering zon. |
| 3 |
4 stage temperature exercise – Temperature is not use when the setting is 0 during the 4 stage warming buffering zon. |
| 4 |
5 stage temperature exercise – Temperature is not use when the setting is 0 during the 5 stage warming buffering zon. |
|
|
| No. |
Temperature – Barrel temperature |
| 0 |
Barrel temperature upper limit alarm value – Barrel temperature temperature alarm upper limit. |
| 1 |
Barrel temperature lower limit alarm value – Barrel temperature temperature alarm lower limit |
| 2 |
Cooler On Deviate – Hydraulic oil cooler activation temperature |
| 3 |
Cooler Off Deviate – Hydraulic oil cooler deactivation temperature |
| 4 |
Temperature Not Up – Setting for temperature warning (C increase per 3 minutes) |
|
|
| No. |
Temperature – Oil temperature |
| 0 |
Oil Temp Up Limit – Hydraulic oil temperature upper limit |
| 1 |
Oil Temp Low Limit – Hydraulic oil temperature lower limit |
| 2 |
Temp Cooler On – Barrel cooler activation temperature |
| 3 |
Temp Cooler Off – Barrel cooler deactivation temperature |
|
|
| No. |
Temperature – Oil temperature preheat |
| 0 |
Oil temperature preheat usage – Oil temperature preheat for usage. |
| 1 |
Oil temperature preheat pressure – Oil temperature preheat pressure |
| 2 |
Oil temperature preheat speed – Oil temperature preheat speed |
|
|
| No. |
Temperature – Setting percentage |
| 0 |
Manual mode preheat percentage(0=not use 1=use) |
|
|
