The ejector can be operated in three different modes to knock the finished product out of the mold at the end of mold opening. You can choose between the Hold, Count Number and the Vibration modes. Warning: Hold mode can be used only in semi-automatic operation. Hold Mode：The ejector moves forward […]
Read more →Mold closing is executed in four phases: Mold Open Stage 1, Mold Open Stage 2, Mold Open Stage 3, and Mold Open Stage 4. Press the Manual key to activate the Manual mode. Switch the HMI display to the Clamp Setting screen by pressing F2 (Clamp) . Then, enter the […]
Read more →There are 5 stages of pressure & speed controlled for mold closing: Mold Close Stage 1, Mold Close Stage 2, Low Pressure Mold Protection and High Pressure.For optimum productivity mold closing should be excecuted as fast as possible. However, it is important to preset correct data to ensure the protection […]
Read more →When changing the mold follows the machine manufacturer’s instruction at all times to avoid the possibility of serious injuries to the machine operators. After you fix the mold on the machine, please ensure that all the parameters for the mold and the injection unit had been properly aligned to avoid […]
Read more →Specifications of Injection Moulding Machine Image supplied courtesy of Rutland Plastics Limited While selecting injection moulding machine, you must understand and value the following specifications Specifications of a Injection Moulding Machine:
Read more →Plastic Injection Moulding Process The plastic injection moulding process produces large numbers of parts of high quality with great accuracy, very quickly. Plastic material in the form of granules is melted until soft enough to be injected under pressure to fill a mould. The result is that the shape is […]
Read more →First introduced in 1983, CHINAPLAS is currently Asia’s NO.1 and world’s NO.2 plastics and rubber trade fair. And it is held in Shanghai from April 25th to 28th. The mega show this year features advanced technology, plastics and rubber technologies and products offered by more than 3,200 exhibitors from around […]
Read more →
The 12th China (Tianjin) International Equipment & Manufacturing Expo (IEME2016) is the largest equipment manufacturing exhibition in China, which devoted to industry development, specialized in serving equipment manufacturing industry chain, integrated with brand exhibition, technology communication, trade cooperation, publicizing and international seminar. IEME2016 drives the transformation and upgrade of equipment […]
Read more →
Powerjet win the “Excellent Strategic Partner” pride During 11th~13th March 2016 , Powerject Plastic Machinery Limited attend the 4th Sino-plas ( China Zhengzhou Plastic Industry Expo ). KF-380S6 thin-wall productS dedicated injection molding machine is shown during the Fair. And our high speed runing machine attract lots customers to look […]
Read more →Double Injection Molding Machine Double Injection Molding, sometimes known as 2 material 2 shot molding or 2K molding, is an innovative manufacturing process used to produce complicated molded parts from two different materials. Through a highly specialized and automated process we carefully control the injection of multiple materials, including two […]
Read more →
