High Speed Injection Molding Machine

K series High Speed Injection Molding Machine

Perfect combination between computer and high efficient proportional plunger variable pump saves electricity by 25%-50%. The economic efficiency is high.
With full flow high precision return oil filter, the oil filter effect is up to NAS –7 levels, can effectively avoid contamination and deterioration of hydraulic oil, thereby hydraulic parts work more stable and service life of hydraulic seals is longer.
Imported advanced hydraulic valve incorporated with differential oil circuit guarantees mould locking device to be fast, stable and low noise, and reduces forming period, increase production efficiency.
Cartridge valve added in the hydraulic system insures the fast response & small impact, which reduces the consumption of the pressure.
Spiral flow cooler is high in heat transfer efficiency and less pressure loss. It guarantees stable operation of hydraulic system, improves repetition accuracy and qualification rate of products.
Low speed and large torque hydraulic motor meets plasticizing demand of different raw material.

Description	UNIT	K-90V/S6	K-126V/S6	K-160V/S6	K-200V/S6	K-250V/S6	K-288V/S6
International Size		900-275	1260-395	1600-551	2000-853	2500-1226	2880-1226
CLAMPING UNIT
Clamping force	KN	900	1260	1600	2000	2500	2880
Opening stroke	mm	320	350	440	490	520	550
Max.daylight	mm	680	750	940	1040	1100	1160
Platen size	mm	540×540	610×610	705×705	775×755	800×760	850×850
Bars distance	mm	360×360	410×410	460×460	510×510	560×490	610×610
Max.mold height	mm	360	400	500	550	580	610
Min.mold height	mm	130	145	160	230	230	280
Ejector stroke	mm	100	100	140	140	145	145
Ejector force	KN	34	42	49	65	77	77
INJECTION UNIT
Screw diameter	mm	36>	40	46	52	60	60
Screw L/D ratio	/	20	20	20.5	20	21	21
Injection pressure	Mpa	169	152	162	164	155	155
Shot volume	cm3	163	238	340	520	791	791
Shot weight (PS)	g	153	213	320	489	744	744
Injection rate	g/s	97	135	158	224	307	307
Plasticizing capacity	g/s	23	31	34	54	59	59
Screw stroke	mm	160	190	205	245	280	280
Screw speed	r.p.m.	227	240	256	245	210	210
POWER UNIT
Hydraulic pressure	Mpa	16	16	16	16	16	16
Pump motor power	KW	11	15	18.5	22	30	30
Heater power	KW	6	7.5	9.8	11.5	13.8	13.8
GENERAL
Oil Capacity	L	180	210	260	340	420	420
Machine weight	Ton	3	4	4.6	6	7.8	8.5
Machine dimension	m	4×1.2×1.7	4.4×1.2×1.8	4.8×1.3×1.8	5.3×1.4×2.1	5.7×1.5×2.2	6.1×1.5×2.2
* Due upgrading of machines, the technical parameters may be updated.

Description	UNIT	K-330V/S6	K-400V/S6	K-500V/S6	K-560V/S6	K-680V/S6	K-850V/S6
International Size		3300-1734	4000-2274	5000-3207	5600-3207	6800-4953	8500-6201
CLAMPING UNIT
Clamping force	KN	3300	4000	5000	5600	6800	8500
Opening stroke	mm	600	710	830	860	930	1030
Max.daylight	mm	1300	1440	1680	1740	1870	2080
Platen size	mm	985×985	1050×1050	1150×1120	1250×1220	1340×1340	1550×1500
Bars distance	mm	670×670	740×720	820×780	860×860	930×930	1030×1030
Max.mold height	mm	700	730	850	880	940	1050
Min.mold height	mm	300	300	300	300	350	380
Ejector stroke	mm	180	210	220	240	265	300
Ejector force	KN	77	110	135	135	184	290
INJECTION UNIT
Screw diameter	mm	68	83	90	90	90	100
Screw L/D ratio	/	21	19	20	20	22.4	21
Injection pressure	Mpa	154	128	128	129	173	168
Shot volume	cm3	1126	1786	2481	2481	2863	3691
Shot weight (PS)	g	1058	1590	2208	2208	2548	3285
Injection rate	g/s	346	523	630	630	621	764
Plasticizing capacity	g/s	74	95	117	117	114	115
Screw stroke	mm	310	330	390	390	450	470
Screw speed	r.p.m.	193	160	160	160	179	160
POWER UNIT
Hydraulic pressure	Mpa	16	16	16	16	16	16
Pump motor power	KW	37	45	55	55	37+37	55+37
Heater power	KW	18	22	28	28	38	42
GENERAL
Oil Capacity	L	460	630	810	810	1000	1300
Machine weight	Ton	11	15	19	19	33	45
Machine dimension	m	6.8×1.6×2.3	7.2×1.65×2.3	8.7×2.1×2.3	8.7×2.1×2.3	9.1×2.4×2.5	10.5×2.6×2.7
* Due upgrading of machines, the technical parameters may be updated.